Large roof 20x30m truss structure for Thailand Project Project place:ThailandSize: 20 x 30 m Systems: Roof truss structureCharacteristics: A large ground support system for the high profile launch. The large 20 x 30 m internal stage size structure was build from 390x390mm spigot truss. Thanks for Mr.Donut's photos from Thailand.
Publish:
2017
-
04
-
25
Click:201
Publish:
2017
-
02
-
28
Click:246
The Sattle Roof 12x10m is based on a HD34 Ground Support Tower and HD44 Main Rig. The main roof structure is made of HD34 and the roof support gables are made of HD33.The Sattle Roof is standard 12m wide and 10m deep.The combination of HD34 Towers and HD44 Main Rig with a HD34/ HD33 Roof Structure ensures a relative high load bearing capacity.This combination guarantees a low transport an storage volume and a fair price.The Sattle Roof can be lifted motorized or by manual hoists. The total roof includes guy wires, structural reports and manual.* PA Wings are availableSattle Roof12x10mTechnical...
Publish:
2016
-
10
-
17
Click:178
The Roof Truss System consist of a TT Ground Supports on eight Towers and a Roof Structure of ST Truss.The Roof Truss can be used on towers or integrated on wings of scaffolding wings.The Roof Truss is available in 25x16m and re-buildable in 19x16m and 16x12m.This roof is constructed on eight Towers and Truss in the main rig with four ST roof gables.The roof gables main rig result in an impressive load bearing capacity.The total roof includes guy wires, structural reports and manual.* PA Wings are available Roof Truss25x16mTechnical SpecificationsLoading Capacity Roof UDL:20000 kgsStructu...
Publish:
2016
-
10
-
14
Click:69
Spigot Roofs Truss consist of a Spigot Truss Ground Supports on six Towers and a Roof Structure of Spigot Truss.All the Roofs are developed to make a standard roof with impressive load bearing capacity and using mainly standard truss elements.The Spigot Roofs Truss are standard available in 14x12m, 16x12m, 18x14m and 20x14m.Those roofs are constructed on six Towers and Spigot Truss in the main rig and roof structure. The gables between the front, centre and back gable are FD43 lengths to support the top canopy.The canopy is tightened with tubes and ratchet straps.The total roof includes guy wi...
Publish:
2016
-
10
-
10
Click:210